Filter
Top Products
Settings
Release R.1.3 UK 61
gis
The cursor moves to the water temperature. See Figure 8.34.
Setting the water temperature
7. Use H and L to select the water temperature. In the example this is 75.
Confirm with E.
The cursor moves to
PUMP ON. See Figure 8.35.
Setting program-controlled pump
8. If required, a pump can be controlled during the period. Use H and L to
select
PUMP ON. The pump ensures a regular circulation of hot water in the
hot water pipes. You can skip this step if you there is no pump in your hot
water circuit.
Confirm with E.
The cursor moves to
START. See Figure 8.36.
9. Confirm with E.
The extra period has been programmed.
n Remark
Once the extra period has completed running, the controller returns to the
mode ON, OFF or WEEK PROGRAM. The following week, the extra period
will NOT be automatically switched on.
8.7 Settings
8.7.1 Introduction
Using the option SETTINGS you can adjust certain settings, and display certain
appliance specifications. See Table 8.1.
8.7.2 Setting menu language
Bring up the menu for selecting the language via:
1. B:
SETTINGS.
Confirm with E.
The display shows the menu for settings. See Figure 8.38.
2. The cursor is positioned beside LANGUAGE
Confirm with E.
The display shows the language selection menu. See Figure 8.39.
ON SU 08:15
OFF SU 12:45
Tset»65ÉC
PUMP ON SAVE
Figure 8.34 Setting water
temperature for extra period
ON SU 08:15
OFF SU 12:45
Tset 75ÉC
PUMP»ON START
Figure 8.35 Pump setting for
extra period
ON ZO 08:15
OFF ZO 12:45
Tset 75ÉC
PUMP ON »START
Figure 8.36 Saving extra period
Table 8.1 Adjustable settings and displayable appliance specifications
Adjustable settings ! Menu language
! Current day of week, and time
Displayable appliance
specifications
This category is only relevant to
the installer and/or service and
maintenance engineer.
! Regulation interval (water
temperature).
! Ignition speed of fan.
! Running speed of fan.
MENU
WEEK PROGRAM
^ EXTRA PERIOD
ȻSETTINGS
Figure 8.37 Settings
SETTINGS
»LANGUAGE
^ DAY/TIME
È SPECIFICATIONS
Figure 8.38 Language