Filter
Top Products
Command Center Function Keys
Your command center has five function keys. These
keys are used to control your system.
COMMAND
Use the COMMAND bar in combination with one or
two numeric keys to perform a function.
ENT/YES
The ENT (Enter)/YES key has two functions. The first
is to complete the entry of your passcode at the
command enter. When ever a function requires that you
enter your passcode at the command center, first press
the digits of the code and then press the ENT key. Your
system will not recognize your passcode until you press
ENT.
The second function of the ENT/YES key is to select
the menu item displayed. Some menu items require
your personal passcode be entered before starting the
function. Remember to press ENT after entering your
passcode.
ESC/MENU
The ESC (Escape)/MENU key has two functions.
First, the ESC/MENU key is used to enter the
Command Menu. Pressing this key when at idle text
takes you to the first item in the menu.
Second, pressing ESC will take you back to the idle
display.
PREV (Previous)
When viewing a list, pressing the PREV key will take
you back to the previously shown item.
NEXT
Press the NEXT key to pass over the present item in a
menu or list.