Filter
Top Products
Fire Trouble Events
When a fire trouble occurs, your command center emits
three warble tones, then a pause (repeatedly).
The system displays the number of fire points with
troubles (A1 ## FIRE TRBLE) and then custom text
for each point.
Silencing Fire Troubles
Entering a personal passcode with the proper authority
level silences a fire trouble and disarms the panel if it
was armed. If you wish to clear the scrolling trouble
message from the display, enter COMMAND 4. If you
wish to review these cleared troubles, this can be done
by using COMMAND 40.
Special Fire Trouble Display
If you silence the command center or clear a trouble
for a Fire Point from the display and the fire point
remains in trouble, FIRE TROUBLE appears in the
command center’s display. FIRE TROUBLE remains
in the display until the condition causing the trouble is
cleared.
Note: Some fire points, when tripped, will display
FIRE TROUBLE for a preset amount of time. If no
other fire activity is detected, this condition will
automatically clear. If the condition remains or another
fire detector is tripped, a fire alarm will occur.
Viewing Fire Troubles
After you enter your passcode, the text of the fire point
in trouble continues to automatically scroll through the
display. Press NEXT to scroll these displays manually
if you wish. Events scroll from oldest to newest.