Filter
Top Products
WATCH MODE ?
COMMAND 6
Watch Mode
Description
With your security system disarmed, you can use watch
mode to monitor some points. Each time some points
are faulted (door or window is opened) the command
center chimes once and displays the point text for 60
seconds. No alarms are generated by this mode except
24-hour alarms (fire, panic, etc.).
When the command center’s keypad lighting is on, the
command center does not chime. The keys light for 20
seconds whenever you strike a key.
Use this function in residential systems to monitor
entries or exits in your home. In commercial systems it
can serve as a door chime to alert you when a customer
or delivery person enters your business.
Note: Contact your security company to find out which
points are watch points and whether or not your system
automatically turns the Watch Mode on whenever you
disarm.
6
Entering Watch Mode:
1. Ensure your command center is at disarmed idle
text.
2. Press the COMMAND bar. The display shows
SYSTEM COMMAND.
3. Press the 6 key.
Note: If you prefer, you may use the Command Menu
in place of steps 2 and 3 to initiate this function. Press
the MENU key to enter the Command Menu, then
press NEXT repeatedly until you reach the WATCH
MODE ? prompt. Press ENT.
4. The display briefly shows WATCH IS NOW ON
before returning to idle disarmed text.
Exiting Watch Mode:
1. Ensure your command center is at disarmed idle
text.