Filter
Top Products
Using Master Arm Inst:
1. The display shows idle disarmed text.
2. Press the COMMAND bar. The display shows
SYSTEM COMMAND.
3. Press the 1 key. Now press the 1 key again.
Note: If you prefer, you may use the Command Menu
in place of steps 2 and 3 to initiate this function. Press
the MENU key to enter the Command Menu, then
press NEXT repeatedly until you reach the MASTER
ARM INST ? prompt. Press ENT.
4. The display shows ALL SECURE.
5. To disarm your security system, enter your
personal passcode and press ENT.
11
MASTER ARM INST ?
COMMAND 11
Turn the Entire System On Without
Delays
Description
Use this function to turn on the entire system, both
perimeter and interior without delays. When entering
COMMAND 11, remember that the second 1 must be
pressed within 2 seconds after pressing the first 1.