Filter
Top Products
2
Contents:
A) Warnings, Recommendations and Overview ................................................................................................ 3
B) Jacketed Cable Preparation.......................................................................................................................... 5
C) Mounting........................................................................................................................................................ 8
D) Scoring .......................................................................................................................................................... 12
E) Standard Polishing Process for Single-mode and Multimode Connectors (>30dB)..................................... 13
F) Polishing Process for Single-mode Connector Return Loss >40dB ............................................................. 16
G) Final Cleaning ............................................................................................................................................... 20
H) Mounting Unjacketed/900 ϑm Buffered Fiber ............................................................................................... 20
I) Connector Assembly and Installation............................................................................................................ 22
J) 3M SC and FC/PC3 Epoxy Field Termination Kits........................................................................................ 24
FC/PC3 Connector
SC Connector
SC Connector
Crimp Ring Boot
1.97 in.
(50.0 mm)
.925 in.
(23.5 mm)
Ø .0984 in.
(2.499 mm)
.283 in.
(7.19 mm)
.266 in.
(6.75 mm)
.289 in.
(7.34 mm)
.205 in.
(5.2 mm)
.972 in.
(24.7
mm)
.068 in.
(1.73 mm)
Key-Shell
.352 in.
(8.94 mm)
.289 in.
(7.34 mm)
.218 in.
(5.54 mm)
.235 in.
(5.97 mm)
BootCrimp Ring
FC/PC3
Connector
2.27 in.
(57.7 mm)
1.66 in.
(15.0 mm)
.925 in.
(23.5 mm)
.154 in.
(3.9 mm)
Ø .234 in.
(5.94 mm)
Ø .386 in.
(9.8 mm)
Ø .094 in.
(2.499
mm)