144
Public Space Parameters
7. Click OK.
8. Click the Plan 0 tab.
9. Configure the settings for billing plan 0.
• Place a check mark in the Enable Plan box to make the plan active. It will appear as an option in the New
User screen presented to subscribers.
• Enter a name for the plan in the Plan Label field.
• Enter a description for this billing option in the Description of Service field (140 characters maximum).
• Define the pricing schemes for this billing plan (Rate Per Minute, Rate Per Hour, Rate Per Day, Rate Per
Week, and Rate Per Month).
— The AP will only use the pricing scheme that corresponds to the Units of Access you selected in the
Billing > Options screen.
• Define the Upstream Bandwidth and Downstream Bandwidth range for this billing plan.
• Define the DHCP Pool: Private or Public.
— If you want to use IP Upsell, be sure to configure at least plan to use Public IP address. See IP Upsell.
• Click OK.
Figure 5-28 Subscriber Billing Plans Screen
10. Configure the other billing plans that you want to offer.
• You can configure up to six different billing plans.
11. Reboot the AP.
