A SERVICE OF

logo

VLAN Configure interface
3.4.5.2 Create VLAN Group
Create Port-Based VLAN
1. Select <Edit>.
2. VLAN Name: Type a name for the new VLAN, ex: VLAN01.
3. Group ID: Type the VLAN group ID.
4. Member: Press "Space" key to change the member value. There are two types to selected:
Member: the port is a member port.
NO: it means that port is NOT a member port.
5. Press "ESC" key to go back action menu line.
6. Select <Apply> to apply the configuration.
"Note: If you have configured the trunk groups, you can see it (ex: Trunk1, Trunk2…) in the port list.
You also can configure the trunk group as the VLAN member.