A SERVICE OF

logo

portpri
POE mode
Set port priority for
the power supply
management.
Switch (poe)# portpri Set
Port [1~8]=1
Set Port 19847000
Priority (1:Critical, 2:High,
3:Low)
Old=[0], New=2
portplm
POE mode
Port Power Limit
Max Setting
Switch (poe)# portpplm
Set Port [1~8]=1 Set Port
1 Power Limit Max
Old=[15400],New=20000
Set Port 1 Power Limit
Max 20000
save
POE mode
Store current
configure
Switch (poe)#save
restore
POE mode Restore to default
Switch (poe)#restore
3.4 Menu Management
After you login to the system, you will see a command prompt. To enter Menu management interface,
enter "menu" command. You will see the main menu interface.
1. Provide a menu line interface to manage and monitor the switch. User can use windows Hyper
Terminal program through the console port to connect the switch for configuration.
2. The default user name and password is "admin".
There are 8 selections as follow.
Status and Counters: Show the status of the switch.
Switch Configuration: Configure the switch.
Protocol Related Configuration: Configure the protocol function.