Basics
33
♦Initial default
Activation time 0♦ to 23 Specifies the time for auto time adjustment.
• When [Slave] is selected for [Auto adjustment time], this
setting specifies the time that the recorder's time is auto
adjusted.
• When [Master] is selected for [Auto adjustment time], this
setting specifies the time that the time setting is output from
the alarm/control terminal.
Summer time
(daylight saving)
Out / Auto♦ Specifies the summer time switching method.
• Selecting [Out] disables summer time.
• Selecting [Auto] enables summer time automatically in
accordance with the summer time switching setup. An
asterisk (*) next to the time indicates that summer time is in
effect.
Summer time
(daylight saving) table
Specifies the summer time start and end time and date settings.
Clicking the [Setup >>] button displays the summer time
switching window.
• [In] specifies the summer time start time and date, while
[Out] specifies the end time and date. Set the rightmost two
digits of the year for the "Year" setting.
• Up to 10 settings can be configured.
• After configuring the settings you want, click the [Set] button
and then click the [x] button in the upper right corner to close
the window.
Important:
• Recording may not be possible and the live image display turns black for about four seconds immediately after one of the following
operations is performed.
⋅ Current time and date setting
⋅ Shifting to/from summertime (daylight saving)
⋅ While [Slave] is selected for auto time adjustment, execution of auto time adjustment (While emergency recording is in progress,
recording takes priority and time adjustment is not performed.).
Item Settings Description
