Lifetime 60019 Manual

next previous

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

Fig. 1

Fig. 2

High Side

High side

Low side

First Shim

Second

Shim

SEC

13.1

In some cases, the shed doors may not completely line up at the tops (ﬁg. 1). When this happens, identify

which side is higher and use a Wooden Shim (AIX) to slightly raise the back corner of the high side until doors line

UPlG)FDOORSNEEDFURTHERADJUSTMENTINSERTANOTHERSHIMUNDERTHEFRONTCORNEROPPOSITEOFTHElRSTSHIM

If the doors still need further adjustment, stack additional shims (one at a time) alternating between the back

and front shims. After doors are aligned, cut off any portion of wood shim that is still exposed. From inside the

shed, drive a 1” nail through the ﬂoor into the shim to hold it in place. Tighten all anchoring hardware now.

DOOR ALIGNMENT

Note: Shim should be placed at the corner, running directly under one wall.

AIX (x4)