A SERVICE OF

logo

66
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
SEC
Fold up fl aps on the end of 90” Shelf (AFV). Set Shelf on Brackets with indentations toward wall, and secure with
six (6) 1/4” x 5/8” Phillips Pan-Head Screws (ADZ).
Upward view
ADZ (x6)
Note: There are only holes for screws along front side of the Shelf (front is labeled “Front” on underside of Shelf).
!
SEC
Set a Shelf Support Bracket (AIY) into the slots of each of the Shelf Support Channels. The slots must be at the
same height.
90” SHELF INSTALLATION
Note: Insert Shelf Support Bracket at an angle.
!
AIY
AIY
AFV
ADZ
ADZ
ADZ
WARNING
4HEWEIGHTLIMITFORAv3HELFISLBPERv
section of Wall Panel. Failure to heed this warning
could result in property damage and/or personal
injury.
11.2
11.3
11