A SERVICE OF

logo

45
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
SEC
SEC
,AY2EAR'ABLE!SSEMBLYmATONTHEGROUNDOVERTHEVent Screen (AIQ) and Louvered Vent (AGP). Align the holes in
THE,OUVERED6ENTWITHTHOSEINTHE2EAR'ABLE!SSEMBLY
!FTERALIGNINGTHEHOLESPRESSDOWNlRMLYONTHE2EAR'ABLE!SSEMBLYWHILEINSERTINGTHElVE#10 x 3/4” Pan-
Head Screws (ADW) and the fi ve (5) #10 x 1/2” Flat Washers (AEE). Pressing down fi rmly while inserting the Screws will
help prevent the Vent Screen from twisting. Set aside.
ADW (x5)
AEE (x5)
AIQ
AGP
Note: Only use a hand screwdriver in this step.
!
ADW
AEE
7.3
7.4
7