A SERVICE OF

logo

28
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
ADJ (x6)
ADJ
ADJ
SEC
With the Truss Assembly on its side, slide a 1/4” Threaded Rod (ADH) through the Roof Truss Brace and Truss
Connector as shown. Secure the top and bottom of the 1/4” Threaded Rod with a 1/4” Cap Nut (ADJ). Tighten all
hardware. The 1/4” Threaded Rod will still spin freely. Set aside. Repeat this section for the second and third Truss
Assemblies.
ADHX.OTTOSCALE
12 11/16”
7/16”X
ADH
WARNING
Do not overtighten the Cap Nut.
3
3.5