2-11
Using the Console Interface
Rebooting the Switch
Using the Console Interface
Rebooting To Activate Configuration Changes. Configuration changes
for some parameters become effective as soon as you save them. However,
you must reboot the switch in order to implement any changes to any
parameters in the following areas:
■ IPX Service
■ Internet (IP) Service
■ Serial Link
■ Console Parameters
■ New VLAN Names
■ System Parameters
If configuration changes requiring a reboot have been made, the switch
displays an asterisk next to the configuration menu item in which the change
has been made. For example, if you change and save parameter values for the
switch’s IP configuration, the need for rebooting the switch would be
indicated by an asterisk appearing in the following screen:
Figure 2-5. Example of a Configuration Change Requiring a Reboot
Reminder to reboot the switch to
activate configuration changes.
Asterisk indicates a
configuration change
that requires a reboot
in order to take effect.
SEDONA.BK : sed_2.fm5 Page 11 Thursday, February 27, 1997 10:11 AM
