7-36
Advanced Concepts
Automatic Broadcast Control (ABC)
Advanced Concepts
can override the setting in this screen by going to the Port Configuration
screen (page 3-6) and setting the broadcast limit value individually for one or
more specific ports.
• If you enabled ABC for IP (figure 7-21, below):
Figure 7-21. ABC Enabled With Default IP Option (No VLANs Configured)
i. Select IP RIP Control.
ii. Use the Space bar to select Yes.
iii. If you want to specify a different global broadcast limit for the
switch or selected VLAN (if VLANs are configured), select the
Bcast Limit parameter and type a value from 0 to 99. (A “0”
disables broadcast limits; 40 is the default setting.) Refer to the
Note on page 7-35.
iv. Go to step 7 on page 7-37.
Note: This is the screen
layout when no VLANs are
configured. The screen has
a different appearance if
VLANs are configured.
SEDONA.BK : sed_7.fm5 Page 36 Thursday, February 27, 1997 10:11 AM
