Troubleshooting Analysis Guide (TAGs) 3-137
TAG 705: Multiple Paper Feeding
Error Code: 705
Possible Causes: Wrong weight or type of paper loaded
Paper improperly loaded
Possible Defects: Upper feed roller assembly
Lower feed roller assembly
Paper cassette
1
Remove paper from the cassette.
• Fan the paper stack and place it in the cassette.
• Make sure the paper curl is turned up in the cassette.
• Make sure the paper is under the corner separators.
• Make sure the rear and side paper guides are positioned properly.
• Make sure the paper being used does not have a high static charge.
• Confirm that the paper in the cassettes meets paper specifications, outlined in the Guide to
Operations at the back of this manual.
• Run at least 20 test prints.
Has the problem been resolved?
No: Continue.
Yes: The paper being used was at fault. Turn to TAG 002: Check & Problem Resolution.
2
Adjust the paper tension lever or pick pressure as outlined in Chapter 9, “General Printer Mainte-
nance”.
Has the problem been resolved?
No: Replace the pick-up roller assembly, then turn to TAG 002: Check & Problem Resolu-
tion.
