A SERVICE OF

logo

M2488 PRODUCT GUIDE INSTALLATION INSTRUCTIONS
April 1997 CG00000-011503 REV. A 1-3
1-3.2 Desktop
There are three desktop configurations for the M2488 drive. Refer to Table 1-2 for the assembly
instructions to use with your configuration.
Table 1-2. Desktop Configurations
CONFIGURATION EQUIPMENT REQUIRED TOOLS
ASSEMBLY
PARAGRAPH
M2488 M2488
IPM
Terminator (may be required)
AC Power Cable (110 or 220 VAC)
Phillips #2
screwdriver
1-6.1
1-6.2
1-6.3
1-6.4
M2488 with ACL M2488
IPM
Terminator (may be required)
ACL
AC Power Cable (110 or 220 VAC)
Optional Support base for M2488 with ACL (5 or
10-cartridge size)
5 or 10-Cartridge Magazine
Phillips #2
screwdriver
5mm, 8 in. long
Allen wrench
1-6.1
1-6.2
1-6.3
1-6.5
1-6.6
M2488 with FACL M2488
IPM
Terminator (may be required)
FACL
AC Power Cable (110 or 220 VAC)
7-Cartridge Magazine
Optional Support base for M2488 with FACL
Phillips #2
screwdriver
5mm, 8 in. long
Allen wrench
1-6.1
1-6.2
1-6.3
1-6.5
1-6.7