MENU
a
a
a
a
abc
a b c
Configuring the printer Configuring the printer
3-19 3-20
- Menu Access - Self Test
There are four possibilities to define the access to the menu by the user. - PRINT TEST 1 (see Chapter 1.10 Test Printouts)
- ALL FUNCTIONS All functions can be used (default) - PRINT TEST 3 gives information about technical
- QUICK SET. OFF With this function the Quick Settings for Macro purposes only. Among other information,
Selection, Vertical Position Adjustment, and the page counter identifies the number of
Fanfold Displacement can be deactivated in the pages printed.
READY or BUSY mode. After pressing one of - I/F Test This function is used to test the serial
these keys the display shows shortly LOCKED interface. It enables test data to be sent
(see also Chapter 2). out from the printer and returned by
- MACROS ONLY - Macros can be selected using the Quick Macro plugged into the serial interface
Selection keys , , and . connector. The test data used consists of
- The Vertical Positioning Adjustment Mode can PRINT TEST 1.
be entered
- The Fanfold Displacement Mode can be - Hex Dump
entered. This function makes it possible that the data received by the printer can be
- NO ACCESS The menu is not accessible at all. printed in hexadecimal format and as ASCII characters. Any non-printable
The menu function PRINT OUT can be activated regardless of the in the ASCII list.
defined menu access.
Note: Only the system manager is able to reset the functions MACROS interrupted during Hex Dump. In this case, printing of data received after
ONLY and NO ACCESS (look at the red page at the end of this book). the break is started on the next available line. The result is an irregular
- PRINT TEST 2 (see Chapter 1.10 Test Printouts)
releases and is intended for service
means of a closed loop connector
analyzed. Control codes are no longer carried out, instead all data is
characters, such as carriage return are only represented as a single dot (.)
It may happen that the transmission of data to the printer will be
right margin which is not an indicator for any loss of data.
