A SERVICE OF

logo

526 RADIUS Commands
Default Configuration
The default value is 3 seconds.
Command Mode
Radius mode
User Guidelines
User must enter the mode corresponding to a specific Radius server before
executing this command.
Example
The following example specifies the timeout setting for the designated
Radius Server.
console(config)#radius-server host 192.143.120.123
console(config-radius)#timeout 20
usage
Use the usage command in Radius mode to specify the usage type of the
server.
Syntax
usage
type
type —
Variable can be one of the following values:
login
,
802.1x
or
all
.
Default Configuration
The default variable setting is
all.
Command Mode
Radius mode