Using the CLI 175
Terminal Paging
The terminal width and length for CLI displays is 79 characters and 25 lines,
respectively. The length setting is used to control the number of lines the CLI
will display before it pauses. For example, the CLI pauses at 24 lines and
prompts the user with the
-more-
prompt on the 25th line. The CLI waits for
the user to press either <q> or any other key. If the user presses any key
except <q>, the CLI shows the next page. A <q> key stops the display and
returns to the CLI prompt.
Boot Message
The boot message is a system message that is not user-configurable and is
displayed when the system is booting. Displayed information includes the
following:
• Operational code date
• The board type
•The CPU
•Memory size
To start the normal booting process, select item 1 in the Boot Menu. The
following is a sample log for booting information.
Boot Menu 3.2.0.1
CPU Card ID: 0x508541
/DskVol// - disk check in progress ...
/DskVol// - Volume is OK
total # of clusters: 15,147
# of free clusters: 5,299
# of bad clusters: 0
total free space: 10,598 Kb
max contiguous free space: 8,345,600 bytes
# of files: 30
# of folders: 1
