4-9
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Chapter 4 Setting Up and Managing Network Configuration
AAA Client Configuration
Adding and Configuring a AAA Client
You can use this procedure to add and configure a AAA client.
To add a AAA client, follow these steps:
Step 1 In the navigation bar, click Network Configuration.
Result: The Network Configuration section opens.
Step 2 Do one of the following:
a. If you are using NDGs, click the name of the NDG to which the AAA client
is to be assigned. Then, click Add Entry below the AAA Clients table.
b. To add a AAA client when you have not enabled NDGs, click Add Entry
below the AAA Clients table.
Result: The Add AAA Client page appears.
Step 3 In the AAA Client Hostname box, type the name assigned to this AAA client.
Note This field does not appear if you are configuring an existing AAA
client.
Step 4 In the AAA Client IP Address box, type the AAA client’s IP address or addresses.
Tip If you want to designate more than one AAA client with a single AAA client
entry in Cisco Secure ACS, you can specify the IP address for each AAA client
to be represented by this AAA client entry. To separate each IP address, press
Enter. You can also use the wildcard asterisk (*) for an octet in the IP address.
For example, if you want every AAA client in your 192.168.13.1 Class C
network to be represented by a single AAA client entry, enter 192.168.13.* in
the AAA Client IP Address box.
Step 5 In the Key box, type the shared secret that the AAA client and Cisco Secure ACS
use to encrypt the data.
