Cisco Active Network Abstraction Administrator’s Guide, 3.5
Page 130 Cisco Systems, Inc.
4. Expand the tree and select the A Side and Z Side port of each device.
For more information about the icons and severity displayed in this
dialog box, refer to the Cisco Active Network Abstraction NetworkVision
User’s Guide.
5. Click Create. The link is validated and a confirmation message is
displayed.
Note: The Create button is only enabled when A Side and Z Side ports
are selected.
Note: A warning message is displayed if:
• One of the validation checks fails
• The operation status of one port is Up and the other port is Down
• The ports selected are not of the same type
• The Layer 2 technology type is not the same
• If one of the ports is part of another link
Click No to cancel the connection.
