Managing AVMs and VNEs
Cisco Systems, Inc. Page 97
• SSH1: When SSH1 is selected the Port field automatically
displays 22. In addition, the SSH information fields are enabled in
the tabbed dialog box.
• Port: When Telnet is selected this field automatically displays 23. When
SSH1 is selected this field automatically displays 22. The user can edit
the port number displayed.
• Prompt: The expected Telnet/SSH string. This information is displayed
in the table (in the relevant column) after clicking Add.
• Run: The Telnet/SSH string to be sent to the device when the expected
prompt is detected. This information is displayed in the table (in the
relevant column) after clicking Add.
The following buttons are displayed in the Telnet / SSH tab of the New VNE
dialog box:
• Add: Adds the Prompt and the Run fields to the list in the table.
• Remove: Removes the selected row from the list in the table.
Use the Up and Down arrows to change the order of the commands in the
list.
Note: The Telnet sequence (the order of the commands) must end with a line
that includes only the prompt field.
The Telnet sequence ends
with a line that includes the
prompt field only
If the SSH1 protocol is selected, enter the required information/properties in
the following fields:
• User Name
• Password
