Managing AVMs and VNEs
Cisco Systems, Inc. Page 101
The following polling interval fields are displayed in the Polling Intervals
area:
• Status: Sets the polling rate for status-related information, such as
device status (up/down), port status, admin status and so on. The
information is related to the operational and administrative status of the
Network Element. The default setting is 60 seconds.
• Configuration: Sets the polling rate for configuration-related
information, such as VC tables, scrambling and so on. The default setting
is 360 seconds.
• System: Sets the polling rate for system-related information, such as
device name, device location and so on. The default setting is
900 seconds.
The following fields are displayed in the Topology area:
• Layer 1: Sets the polling rate of the topology process as an interval for
the Layer 1 counter. This is an ongoing process. The default setting is
9000 seconds.
• Layer 2: Sets the polling rate of the topology process as an interval for
the Layer 2 counter. This process is available on demand. The default
setting is 9000 seconds.
6.9 Viewing and Editing a VNE’s Properties
Sheer DNA Manage enables the user to view and edit the properties of a
VNE in a Sheer DNA Unit, for example, the status and Telnet settings. For
more information about VNEs, refer to page 89.
To edit a VNE’s properties
1. Select the DNA Servers branch in the Sheer DNA Manage tabbed dialog
box. The DNA Servers branch is displayed.
2. Expand the DNA Servers branch and select the required AVM sub-branch
in the Tree pane.
