Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key Parameters
41-001343-02 REV04 – 05.2014 A-168
Parameter –
prgkeyN value
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description This is the value you assign to the programmable key.
The “prgkeyN value” parameter can be set for the following softkey types only:
• speeddial (you can enter a speeddial number for this field; optionally, you can also enter
a prefix for the speeddial value to allow the phone to dial the prefix after you press the
speeddial programmable key; you then enter the rest of the number from the keypad
on the phone).
• line
• blf
• sprecode
• dcp
• xml
• park
• pickup
• blfxfer
• speeddialxfer
• speeddialconf
• speeddialmwi
• redial
• filter
• paging
Notes:
• For speeddial the value is the phone number, extension, or prefix number to enter for
the softkey.
• For line the value is optional; for example L4.
• For blf the value is the extension you want to monitor.
• For sprecode the value is dependent on services offered by server.
• For park and pickup valid values, see Chapter 5, the section, “Park/Pickup Call Server
Configuration Values” on page5-182.
• For xml you can specify a URI to use for this XML softkey. The variables you can use with
the XML softkey URI are:
• $$SIPUSERNAME$$
• $$SIPAUTHNAME$$
• $$PROXYURL$$
• $$LINESTATE$$
• $$LOCALIP$$
• $$REMOTENUMBER$$
• $$DISPLAYNAME$$
• $$SIPUSERNAME$$
• $$INCOMINGNAME$$
• $$CALLDURATION$$
• $$CALLDIRECTION$$
• For paging the value is the ip and port (the port range is from 1 to 65535).
Format String
Default Value Not Applicable
Range Not Applicable
Example prgkey3 value: 411
prgkey4 value: 123456+ (example of a speeddial prefix)
