Using the Configuration Management Menu 81
The Equipment List displays the following information for each installed module:
Slot—Slot number. This is a reference number for the ports on the motherboard.
This number corresponds to the number on the List Card menu. (See Figure 51,
later in this chapter.)
Card type—The card type: Shelf, MCPU, CTX, T1/E1 UNI (4), OC3/STM-1 UNI,
SIM, Ethernet, or CBR T-1DSX, or CBR E1.
PART#-idprom—The part number as programmed at the factory.
PART#-oem—The part number for OEM customers.
Serial #—The serial number for the card. This is the same for all ports on the
motherboard. The optional CBR module has a separate serial number.
Rev #—The revision number for the card. This is the same for all ports on the
motherboard, as they come already installed in the unit. The optional CBR module
has a separate revision number.
Using the
Configuration
Management Menu
Select [2] Configuration Management from the Main menu to display the
Configuration Management menu, shown in Figure 50. Use this menu to access
submenus and screens that allow you to:
n Manage cards—View shelf configuration information and configure the
PathBuilder S330/S310 CPU, CTX, ports, CBR module, and Voice Compression
module.
n Manage circuits—List, add, modify, and delete virtual circuits.
n Manage the bridge—Set the bridge aging timer and configure the bridge.
n Manage the video dial feature—View the call routing table, manually start
and end video dial-up sessions.
Figure 50 Configuration Management Menu
