Installation Procedures 41
Figure 17 PathBuilder S330/S310 Common LEDs
Figure 18 shows the port configuration of a PathBuilder S330/S310.
Figure 18 PathBuilder S330/S310 Ports and CBR Module
The following sections tell you how to make connections to the ports of the
PathBuilder S330/S310.
Alert
Status
Power
Optional CBR module
T1/
n
x T1 or E1/
n
x E1 interface
OC3/STM-1 port (PathBuilder S330 only)
Serial (V.35/RS-449/RS-530/X.21) port
Ethernet port
RS-232 (console) port
CBR (V.35/RS-449/RS-530/X.21)
Optional voice compression module
VCM T1-DSX or E1 port
Optional DS3 or E3 module
DS3 or E3 port
CBR module T1-DSX or E1 ports
(PathBuilder S330 only)
installed in expansion slot 9
installed in expansion slot 7
serial port
(only 1 port for PathBuilder S310)
installed in expansion slot 8
(one T1 or E1 for PathBuilder S310)
