Filter
Top Products
29
2. Press
ADV
DAY
until the day you want to copy
from is displayed. If you have not com-
pleted programming for this day, do so
before proceeding.
3. Press
HOLD
COPY
once. COPY will appear on the
display. A number from 1 to 7 will also be
displayed, representing the day you have
selected to copy from (Monday is 1, Tues-
day is 2, etc.). For example, if in step 2 you
selected to copy Wednesday’s program,
when you press
HOLD
COPY
, COPY 3 will be dis-
played.
4. Press
ADV
DAY
to select the day you want to copy
the program TO.
5. Press
HOLD
COPY
. COPY will disappear from the
display, and the display will show the copied
heating/cooling time and temperature for
the day you copied to.
6. Repeat the above steps to copy any day’s
programming into any other day’s program.
7. Press
RUN
PRGM
to begin program operation.
CHECK YOUR PROGRAMMING
Follow these steps to check your thermostat
programming one final time before beginning
thermostat operation.
1. Press
SYSTEM
SWITCH
until HEAT is displayed.