Filter
Top Products
27
Program Cooling Temperatures
If outside temperature is below 50°F, we
recommend that you remove the ther-
mostat from the wall before proceeding
with the following steps to program cool-
ing temperatures. Personal injury and/or
property damage could result from air
conditioner compressor slugging. Fresh
“AA” alkaline batteries (such as Ener-
gizer
®
brand) must be installed to per-
form off-wall programming. Program-
ming away from the wall should prevent
accidental compressor operation. BE
SURE TO PRESS
SYSTEM
SWITCH
UNTIL OFF IS
DISPLAYED BEFORE REATTACHING
THE THERMOSTAT TO THE SUBBASE!
1. To program cooling temperatures for the
heating/cooling periods you have already
set, press
SYSTEM
SWITCH
until COOL is displayed.
2. Press
VIEW
PRGM
once. The Monday heating/cool-
ing period 1 start time you programmed
earlier will be displayed, along with the
currently programmed COOL A, B, C, or D
temperature.
3. Press or to display the COOL A,
B, C, or D temperature you want for Monday’s
heating/cooling period 1. If you want the fan
to run continuously during this period, press
FAN
SWITCH
until PRG FAN is displayed.
4. Press
VIEW
PRGM
, then press or to
select Monday’s COOL A, B, C, or D tem-
CAUTION
!