Filter
Top Products
5
OPERATING YOUR THERMOSTAT
Before you begin programming your new ther-
mostat, you should be familiar with its features
and with the display and the location and
operation of the thermostat buttons. The infor-
mation in this section will help you become
familiar with your thermostat so that you can
easily program it.
Your thermostat consists of two parts: the
thermostat body and the subbase.
Press
SYSTEM
HEAT-OFF-COOL-AUTO
to turn thermostat OFF
before removing or attaching the ther-
mostat body. Equipment damage and/
or personal injury could occur.
CAUTION
!
The subbase is attached to the wall, but you
can remove the thermostat body for easy pro-
gramming. To remove the thermostat body
from the subbase, grasp the thermostat body
and gently pull it out from the bottom of the
subbase, then pivot up. To attach the thermo-
stat body, line up the four terminal pins on the
upper section of the thermostat back with the
matching connector on the subbase. Insert
these, then gently pivot the thermostat body
down to connect the nine pin connectors on the
lower portion of the thermostat back. Gently
push until the snap connectors engage. DO
NOT FORCE OR PRY THE THERMOSTAT,
as this may damage the unit.