Filter
Top Products
14
conservation when the building is unoccu-
pied for an extended period of time.
• °F/°C CONVERTIBILITY — Press
TIME
FWD
and
TIME
BACK
at the same time until the tem-
perature display is in °C (Celsius). To
display °F, repeat the process.
• ADJUSTABLE HEATING AND COOL-
ING CYCLE TIMES (ANTICIPATION) —
If the heating/cooling system is turning on
and off too often (short cycles) or not often
enough (long cycles), you may want to
adjust the anticipation setting.
An anticipation setting of less than 10
may cause decreased compressor life.
• TWO HOUR TEMPERATURE OVER-
RIDE — Press or until the
display shows the temperature you want.
The thermostat will override current pro-
gramming and keep the room temperature
at the selected temperature for two hours.
After two hours, the thermostat will auto-
matically revert to the program.
• HOLD TEMPERATURE — The thermo-
stat can hold any temperature within its
range for an indefinite period, without re-
verting to the program. Press
HOLD
TEMP
. HOLD
will be displayed. Then choose the desired
hold temperature by pressing or .
The thermostat will hold the room tem-
perature at the selected setting until you
press
RUN
PRGM
to start program operation
again. This feature is ideal for energy
CAUTION
!