Filter
Top Products
25
5. Press
SET
DAY
once. The display will show
the day of the week as an abbreviation
(MO for Monday, TU for Tuesday, etc.).
6. Press and hold either
TIME
FWD
or
TIME
BACK
until
you reach the current day of the week.
7. Press
RUN
PRGM
once. The display will show
the correct time and room temperature
alternately.
Enter Heating Program
During programming, if you don’t press any
buttons for 5 minutes, the thermostat will enter
the HOLD mode and will maintain a constant
temperature. The display will revert to the
alternating time/temperature display. To re-
sume programming after this happens, press
VIEW
PRGM
until you are at the point where you
stopped programming. Then you may con-
tinue to enter your programs normally. If you
want to stop programming at any time, simply
press
RUN
PRGM
to resume program operation.
1. Press
SYSTEM
HEAT-OFF-COOL-AUTO
until HEAT is displayed.
2. Press
VIEW
PRGM
once. 5 DAY (indicating
weekday program), and MOR, represent-
ing the morning heating period, will ap-
pear in the display. Also displayed are
the currently programmed start time for
the MOR period and the currently pro-
grammed temperature.
EXAMPLE:
5 DAY