Filter
Top Products
24
ENTERING YOUR PROGRAM
Follow these steps to enter the heating and
cooling programs you have selected.
We recommend that you remove the thermo-
stat from the wall for programming (especially
for entering cooling programming). A fresh 9
volt Energizer
®
alkaline battery must be in-
stalled to perform off-wall programming. BE
SURE TO PRESS
SYSTEM
HEAT-OFF-COOL-AUTO
TO TURN THER-
MOSTAT OFF BEFORE REATTACHING
THERMOSTAT TO SUBBASE!
You cannot program the thermostat with the
SYSTEM SWITCH in the AUTO position.
Set Current Time and Day
1. Press
SET
CLOCK
once. The display will show
minutes only.
EXAMPLE:
2. Press and hold either
TIME
FWD
or
TIME
BACK
until
you reach the correct minutes.
3. Press
SET
CLOCK
once. The display window will
show the hour only.
EXAMPLE:
4. Press and hold either
TIME
FWD
or
TIME
BACK
until
you reach the correct hour and AM/PM
designation (AM begins at midnight; PM
begins at noon).
NOTE