Filter
Top Products
21
To operate properly in the AUTO mode, there
must be a minimum 1°F separation between
the highest heat temperature and the lowest
cool temperature (see diagram below).
Determine the time periods and heating and
cooling temperatures for your weekday pro-
gram. You must program 4 periods for each
day (MOR, DAY, EVE, and NHT). However,
you may use the same heating and cooling
temperatures for consecutive time periods.
You can choose start times, heating tempera-
tures, and cooling temperatures independently
for both weekday and weekend programs (for
example, you may select 5:00 AM and 70° as
the weekday MOR heating start time and
temperature, and choose 7:00 AM and 76° as
the weekday MOR cooling start time and
temperature). Use the following table to plan
your program time periods, and the tempera-
tures you want during each period. You may
also want to look at the sample program table
to get an idea of how the thermostat can be
programmed.
79
78
77
76
75
74
COOLING TEMPERATURES
HEATING TEMPERATURES
DEAD BAND 1°F
NOTE