Filter
Top Products
1. Unpack the installation kft. Make sure you
have all the necessary parts.
In~tdatkm kit contenta:
A Platform (1)
B. Adjustment bolt (1)
C. Screw - #10 x 2%’ flat-head (2)
OR
Screw - #lO x 1%’ pan-head (2)
OR
Screw - #lO x 1’ pan-head (2)
D. Safety bracket (1)
E. Screw - #8-32 x o/4’ self-threading (7)
F. Track seal (1)
G. Foam seal strip/Sash seal (1)
H. Side channel seal (1)
I. Plastic window panel (1)
J. Window locking bracket (1)
K. Hex flange nut - l/4’ (1)
L. Screw - #8 x W’ round wood-head (8)
M. Support brace (1)
NOTE: Use the scale at the right to measure the
length of your screws. This will come in handy
when separating screws for installation.
7