Filter
Top Products
15.
16.
17.
16.
19.
Slide the inner window each firmly
against the side of the cabinet. Make sure
not to peel the seal strips from the window
track and cabinet side channels. If the panel
frame does not fit snugly to the inner
window sash, secure the panel frame to the
sash with #8 x %-inch wood screws or #8-
32 x %-inch self-threading screws. Use the
partially plugged holes in the panel frame.
For metal or plastic window sashes or
jambs, drill H-inch pilot holes for the self-
threading screws.
NOTE: When installing screws in the
window sash, be sure not to interfere with
the glass inside the sash retaining channel.
Hook the safety bracket over the base of
the unft and fasten it to the front of the
platform assembly. Use a #8-32 x %-inch
self-threading screw.
NOTE: The bracket prevents movement of
the air conditioner (either in or out) after
completing the installation.
Stuff the foam aeal
l
trip/aaah real
between the vertical sash and the window
glass.
UK the window locking brmket to lock
the inner window sash to the base of the
outer window sash. Use one It8 x %-inch
wood screw or #8-32 x %-inch self-threading
screw. (See illustration.)
Replete the air conditioner front panel
frame and air intake panel. Make sure you
replace the 2 screws that hold the front
panel frame in place before you replace the
air intake panel.
Alternate window jamb
applications
To install in windows having no flanges or wood
stops on the top and side jambs, the channels
and panel frame must fit against a mating flange
(or l&inch max. thick angle) attached to the
window jambs. Figure A shows this angle
installed. Figures B CL C show alternate treat-
ments. On the sash side of the opening, the
leading comer of the inner sash becomes the
flange. You can purchase the angle strip locally.
12
6lids inm
window Bmoh
lirmly wnst
Cdhld
InrW ufoty braket
A
AddM*to
-stop
C
Add16-
or
la-
wge we