Whirlpool ACSIOZ ACS520 Air Conditioner User Manual


 
10. Cut ride channel eeal into 2 equal lengths.
Remove the protective backing and apply it
to the rear side of the cabinet side channels,
starting just below the panel frame assem-
bly. Pinch off excess length so the seal is
even with the bottom of the cabinet side
channel.
11. Remove the air inteke panel and front
Penel fmme. First, press down on the top
edge of the air intake panel and tilt ft toward
you. Lift it up to release the bottom spring
clips. Next, remove the 2 phillips-head
screws holding the front panel frame in
place. Finally, press down on the top edge
of the front panel frame, tilt it forward, and lift
it up off the bottom spring clips.
NOTE: Do not push or pull on the air
direction louvers.
12. Piece the air conditioner in the window
opening. It should sit on the platfom-r
assembly so that the window panel frame
and the cabinet side channels are against
the top and side window jambs. Side
channels should overlap side window jambs
equally.
3. Prmu down and tilt forward to
romovo front pmol hamo.
l.Pmedown
enduft
toward to
remove air
lntako panel.