Filter
Top Products
11. Peel backing from seal strip (Item 8) and
press it onto side filler frame guides on each side
of unit.
Butt to bottom
of flller frame.
cut off axcess
length below
unlt.
Seal
strip
12. Place unit in wlndow by resting unit on
shelf. Push unit toward window so side angles are
sealing against the side jamb stop (see diagram).
Slide the opened window sash firmly to make cer-
tain the frame and unit sealing strips are sealing.
13. Using Ye” drill, install locking screws
(Item 7). Use two screws in top jamb and in the
side bottom flanges. If you need additional holding
strength, add two more screws at upper sides of
filler frame (marked ‘A”). Also, two screws can be
added at unit sides (marked “B”). However, if yqu
add screws at “B:’ you must use a
%6”
drill bit to
predrill through the plastic sides of air conditioner.
14. Lock the sllding sash at bottom using lock
bracket (Item 10) and screw (Item 7) as shown in
diagram at left. Use a ‘/a” drill bit to drill through
track before inserting screw.
15. Cut seal strip (Item 11) to length. Install it
between space of opened sash and glass of the
closed sash (see diagram).