Filter
Top Products
Contents
Page
Electrical Requirements. ..........
Receptacle wiring .................
Electrical requirements .............
Electrical connection ..............
Installation Instructions ...........
Installation instructions 1 ...........
Installation instructions 2 ...........
Operating Instructions ............
Starting your air conditioner
.........
The exhaust control ...............
Changing air direction ..............
Cleaning and caring for your
air conditioner ..................
It You Need Service Or Assistance
Whirlpool Room Air Conditioner
Warranty ..........................
3
3
3
3
4
4
8
11
11
11
11
12
15
16
01969 Whirlpool Corporation
Thank you for buying a Whirlpool appliance.
Please complete and mail the Owner
Registration Card provided with this prod-
uct. Then complete the form below. Have this
information ready if you need service or call with
a question.
l
Copy model and serial numbers from plate
(see diagram on page 12) and purchase date
from sales slip.
l
Keep this book and sales slip together in a
handy place.
It is your personal responsibility to be sure
your air conditioner:
l
Has been properly installed.
l
Is the right size for the area you want to cool.
l
Is properly connected and grounded to electrical
supply.
l
Is used only for the job it was intended to do.
l
Is not used by children or anyone unable to
operate it properly.
l
Is properly maintained.
l
Also, remove energy label and buy guide. Use
damp cloth to take off any glue residue. Do not
use a sharp instrument or any harsh or abrasive
cleaners.
Important:
Please read this Use & Care Guide before install-
ing or using your air conditioner. It tells you how to
install and operate it, and gives important electrical
information. Save it for future use in case you have
a question or move the air conditioner.
Personal Injury Hazard
The metal fins on the coils are sharp. Han-
dle the air conditioner with care. Failure to
do so could result in personal injury.
Model Number
Serial Number
Purchase Date
Servlce Company Phone Number
2