Filter
Top Products
– 12 –
4. Remove the grid handle from the grid arm
lifting assembly.
5. Remove two bolts, six washers and two nuts
from the grid arm lifting assembly and the grid
carriage assembly.
6. Remove the grid arm lifting assembly from
the grid carriage assembly and the broiler.
7. Remove the four cotter pins and bolts (two
each side) from the lever arm bracket and
upper and lower lever arm assemblies.
NOTE: When installing grid arm lifting assembly,
install washers between grid arm lifting assembly
and grid carriage assembly.
8. Reverse the procedure to install.
BURNER CERAMICS (GHCB40)
WARNING: SHUT OFF THE GAS BEFORE
SERVICING.
NOTE: Lower broiler pan for easier access.
1. Allow the burner ceramics to cool.
2. Carefully push up on the side and center
ceramics to remove from the broiler.
3. Reverse the procedure to install.