Filter
Top Products
– 28 –
SECURITY CODES
To Add a User or
Change a User's
Code
Changing the Master
Code
Follow the procedure
for changing a user's
code, but enter user
#02. You will be
prompted to enter the
new code a second
time to confirm
accuracy.
Important: Temporary users of the system (e.g., babysitters, cleaning staff) should not be shown how to
use any system function they do not need to know, such as bypassing protection zones for example.
Sequential key depressions for all steps in a procedure must be made within 2
seconds of one another, or else the entire entry is aborted and must be repeated from
its beginning (e.g., perform steps 1, 2, and 3 below with no delay between steps).
CODE
1. + 8 ENTER MASTER CODE THEN PRESS CODE KEY
(Master Code)
Example: 7 2 9 6 then press the CODE key.
2. ENTER USER NUMBER
(User Number) Enter the 2-digit User Number (03-16) for the user you
are adding or changing.
3.
ENTER USER'S CODE
(User's Code) Enter the new 4-digit security code for that user.
CODE
To Delete a User
1.
+ 8 ENTER MASTER CODE THEN PRESS CODE KEY
(Master Code)
Example: 7 2 9 6 then press the CODE key.
2. ENTER USER NUMBER
(User Number) Enter the 2-digit User Number (03-16) for the user
whose code you are deleting.
3. ----------- STOP
Wait (about 3 seconds) until the keypad beeps once
before pressing any other key. The code is
automatically deleted.