Filter
Top Products
– 26 –
PAGING FEATURE
General
If the paging feature has been programmed for your system, your pager will respond to
certain conditions as they occur in your system by displaying a 10-digit code. This
code indicates the type of condition that has occurred.
Code Format The 10-digit pager code takes the following form:
SSSS-EEE-NNN
SSSS = 4-digit subscriber number (this number will always appear at the beginning of
the pager display)
EEE = 3-digit number describing the event that has occurred as follows:
911 = Alarm (NNN following indicates the zone that caused the alarm)
001 = Open, system disarmed (NNN following indicates user number)
002 = Close, system armed (NNN following indicates user number)
811 = Trouble (NNN following indicates the zone that caused the trouble)
NNN = 3-digit user or zone number, depending on the type of event that occurred
Examples:
Pager displays: 1234–911–004
This indicates that your system (subscriber 1234) is reporting an alarm (911) due to a
fault on zone 4 (004).
Pager displays: 1234–001–005
This indicates that your system is reporting an open/disarm (001) by user 5 (005).