Filter
Top Products
– 18 –
ARMING ALL PROTECTION
(With Entry Delay OFF)
Using the
4
MAXIMUM
Key
Use this key when the premises will be vacant for extended periods of time such as
vacations, etc., or when no one will be moving through protected interior areas.
When armed in MAXIMUM mode, the system will sound an alarm if a protected door or
window is opened, or if any movement is detected inside the premises. You may leave
through the entrance door during the exit delay period without causing an alarm, but an
alarm will be sounded as soon as someone re-enters.
Close all protected perimeter windows and doors before arming (see CHECKING
FOR OPEN ZONES section). The green READY indicator (if present) on the keypad
should be lit if the system is ready to be armed.
MAXIMUM
1. + 4 ENTER SECURITY CODE THEN PRESS MAXIMUM
(Security Code)
Example: 7 2 9 6 then press the MAXIMUM key.
2.
ARMED
*
MAXIMUM
*
YOU MAY EXIT NOW
LISTEN
The keypad will beep twice, or beep continuously if exit
warning has been programmed for your system, and
will display the armed MAXIMUM message
(AWAY/INSTANT on fixed-word keypads). The red
ARMED indicator also lights.
The "You May Exit Now" portion of the message
disappears when the exit delay expires.