Filter
Top Products
– 14 –
CHECKING FOR OPEN ZONES
Using the *
READY Key
Before arming your system, all protected doors, windows and other protection zones
must be closed or bypassed (see BYPASSING section). Otherwise the keypad will
display a "Not Ready" message. Using the READY key will display all zones that are
faulted, making it easier for you to secure any open zones.
To show faulted zones:
DISARMED - PRESS
∗
Note: A green READY indicator (if present) on the keypad will be lit
T O SH OW F AUL TS if the system is ready to be armed. If not lit, the system is not ready.
READY
1. ∗ PRESS THE READY KEY
Do not enter security code, but simply press the
READY key.
2.
FAULT 05 FRONT
UPSTAIRS BEDROOM
SECURE FAULTED ZONES
Typical fault display shows open zones. Secure or
bypass the zones displayed before arming the system.
3.
***
DISARMED
***
READY TO ARM
SYSTEM CAN BE ARMED
The "Ready" message will be displayed when all pro-
tection zones have been either closed or bypassed.
You may now arm the system as usual.