45
© 2013 Directed. All rights reserved.
1-Way
45
menu is accessed and can be set. Press buttons indicated below,
1beep and flash turns the feature on, 2 beeps and flashes turns
the feature off.
• Autolock feature: Press
to turn on/off.
• Remote Beeps: Press
to turn on/off.
• Car 2 feature: Press
to turn on/off.
To save and exit the remote feature programming, press the
button once and then press/hold, the transmit LED shuts off con-
firming exit.
3. Remote Learning
Prepare the the vehicle system to be paired with a new remote.
1. Open at least one of the vehicle’s doors
2. Turn the key to the on position
3. within five seconds press and release 1 time the control but-
ton on the control center.
4. Within five seconds press and hold the control button. the
status LED will flash one time and the siren will chirp once to
confirm the system is ready for remote pairing.
5. Release the control button and proceed below.
Note: if pairing does not result within 60 seconds, the system will
exit and the siren will chirp.
Prepare the 1-way remote to be paired with the system.
1. Make sure the remote control is set for the desired car 1 or
car 2 operation.
2. Press/hold the
button on the remote for eight seconds,
the transmit LED comes on, the programming main menu has
been accessed.