Filter
Top Products
31
© 2013 Directed. All rights reserved.
Feature Details
31
Full Silent Arm Protection
Sensor Warn-away, Sensor Full Trigger and Point of Entry activations
will only send messages to the remote, with parking light flash and
siren outputs defeated.
Sensor Warn-away Messages
When the remote receives a Sensor Warn-away message it emits
10 beeps (if on) and displays a sensor zone specific
SENSOR WARN
text for 30 seconds. Warn-away messages cannot be reviewed or
displayed in reports.
Full Trigger Messages
A Full Trigger message generates a Full Trigger output of siren tones
and zone specific
TRIGGER
text followed by an alert that consists of
one long beep per minute for 10 minutes.
To stop the output and alert, press a command button to perform a
command, or Press the
button.
Emergency Override
The following procedure disarms the system when a programmed re-
mote is not available. Number of presses__________
1. Turn the ignition On.
2. Press the control button on the Control Center the correct
number of times (the default is one press).
3. After a few seconds the siren output ceases and the system
is disarmed.
Note
As a precaution, if programmed for Passive Arming or Auto
re-arming the system should be placed into Valet Mode until
a remote is available .