Filter
Top Products
12
© 2013 Directed. All rights reserved.
12
Responder LC Command table
Button
Level
Direct Access
x 1
LEVEL 1
x 2
LEVEL 2
x 3
LEVEL 3
x 4
LEVEL 4
Arm/Lock
(Panic)
Silent Arm Sensor
Bypass
Sensor Silent
Arm
Full Silent
Arm
Disarm/Unlock Silent Disarm Remote Valet Car Finder
Remote Start Runtime
Reset
Timer Start Smart Start Defogger
A U X
Aux/Trunk AUX 1 AUX 2 AUX 3 AUX 4
Advance Level
Change Car
(3s), Enter
programming
(8s)
Temperature
Check
Runtime
Remaining
Alarm
Report
Fault Condition Alerts
If, when performing a command, a condition exists that does not
allow activation of an Alarm feature* or Remote Start feature**,
the
NOT AVAILABLE
or
REMOTE START ERROR
text and a fault tone will
play.
* Alarm feature not available when the system status is incorrect
upon receiving the command. (Example: Sensor bypass com-
mand is received when disarmed).
Refer to the notes included in the following command descriptions
that address these faults or go to “Feature not Available” on page
42 for more details.