Filter
Top Products
39
© 2013 Directed. All rights reserved.
Feature Details
39
Remote Start Error
For user safety, the system must be properly configured or remote start
will not activate. If the remote start fails to active, refer to the follow-
ing table for the screens and parking light flashes that will identify the
configuration issue and resolution.
Flashes * Possible Fault Solution
5 Brake on Release foot brake
6 Hood open Close hood
7 After performing Remote Start
command - MTS not enabled
After performing Timer Start or
Smart Start command
Enable MTS mode
Check all Solutions
8 Toggle Switch off Turn switch on
None Alarm is triggered Disarm or reset alarm
* Refers to the number of parking light flashes.