Filter
Top Products
4
OWNER'S MANUAL • T30
POWER CORD AND GROUNDING
INSTRUCTIONS
Plug the socket end of the power cord into the
treadmill at the left front corner. Before connecting
the device to a power source, make sure that local
voltage matches that indicated on the type plate. The
treadmill operates at 110 V or 230 V.
This treadmill must be grounded. If it should
malfunction or breakdown, grounding provides a
path of least resistance for electrical current to reduce
the risk of electrical shock. This product is equipped
with a cord having an equipment-grounded conductor
and a grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed
and grounded in accordance with all local codes
and ordinances. Do not use extension cables when
connecting the equipment to the power source.
DANGER! Improper connection of the equipment-
grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or
serviceman, if you are in doubt as to whether the
product is properly grounded. Do not modify the
plug provided with the product - if it will not fit the
outlet, have a proper outlet installed by a qualified
electrician.
SAFETY TETHER KEY
The treadmill cannot be used if the tether key
is not properly installed on the console; if the
key is removed from its place, the treadmill will
immediately stop. Place the safety tether key in its
place on the console. Ensure that the clip of the safety
tether key is properly attached to your clothing; as
the cord tightens, make sure the clip does not detach
itself from your clothing before the safety tether key
disconnects from the console.
CONSOLE
KEY FUNCTIONS
MAJOR FUNCTION KEYS:
1. ELEVATION +: Increases the elevation level
in the range from 0% to 12% shown in the
HEART RATE / ELEVATION Display.
Pressing once increases 1 % and to speed up
the decrement by pressing and holding it for 2
seconds.
2. ELEVATION –: Decreases the elevation level
in the range from 0% to 12% shown in the
HEART RATE/ ELEVATON Display. Pressing
once increases 1 % and to speed up the
decrement by pressing and holding it for 2
seconds.
3. RESET: Press this button to turn on or turn off
the power.
4. START/STOP: Starts or stops the program.
5. SELECTION DIAL: The selection dial functions
in two ways:
a) Rotating the dial. By rotating the dial
clockwise, you can increase setting values and
scroll the programs in an order of the programs.
By rotating the dial anticlockwise, you can
decrease setting values and scroll the programs
in an order of the programs. During preset
proles and [HRC] you can adjust the intensity
by rotating the dial.
b) Pressing the dial is [ENTER]. By pressing
the dial, you can accept the selection you made
when rotating the dial.
6. SPEED +: Increases the speed level in the
range from 0.8 to 18.0 KPH (0.5 to 11 MPH)
shown in the SPEED Display. Pressing once
increases 0.1KPH (0.1 MPH) and to speed up
the increment by pressing and holding it for 2
seconds.
7. SPEED –: Decreases the speed level in the
range from 0.8 to 18.0 KPH (0.5 to 11 MPH)
shown in the SPEED Display. Pressing once
decreases 0.1 KPH (0.1 MPH) and to speed up
the decrement by pressing and holding it for 2
seconds.
8. PSC: Position Speed Control (PSC) allows you
to adjust the track speed without touching the
console by changing your position on the track
during exercise. The PSC function requires the
use of a heart rate monitor. PSC can be used
with manual exercises, HRC exercises with
elevation adjustments and with the [Rolling
Hills] prole.
SPEED HOT KEYS:
6 Speed Hot Keys are set as 4, 6, 8, 10, 12, and 14
KPH or set as 2, 3,4,5,6,7 MPH. For example, the
speed changes from any speed to 8 KPH by pressing
the Speed Hot Key 8.
ELEVATION HOT KEYS:
6 Incline Hot Keys are set as 0,2,4,6,8 and 10% For
example, the elevation level changes from any level to
4% by pressing the Elevation Hot Key 4.
T30_08_LOCKED.indd 4 16.5.2008 12:11:28